To keep your leather looking beautiful for a long time to come please follow these instructions:
Leather should be cleaned often. Frequent and gentle cleaning is easier on leather versus less frequent, more aggressive cleaning. Cleaning will remove dust, dirt, and perspiration. We recommend that you first wipe off any dust, paying special attention to those areas where particles will collect, such as the area between the seat and the cushions.
Clean pigmented and semi-aniline leather should be cleaned with a mild soap and water solution (a mild soap will have a neutral pH so it is not harsh on your skin and therefore not harsh on the leather). For general cleaning, use a weak solution of soap; 3 – 4 drops of soap per liter of water. Use a slightly higher concentration to remove more excessive dirt. Always wipe off any residual soap solution from the leather with a clean, damp cloth. It is important that you do not saturate the leather. Always test the soap solution in an unseen area of the sofa to ensure the solution does not damage the leather.
Conditioning is not necessary. Cleaning to remove skin oils is the best prevention to any deterioration of the leather. The use of any conditioners or treatments on your furniture will void the manufacturer’s warranty.
COVER CARE – NATURAL AND FULL ANILINE
Leather should be cleaned often. Frequent and gentle cleaning is easier on leather over less frequent, more aggressive cleaning. Cleaning will remove dust, dirt, and perspiration. We recommend that you first vacuum off any dust, paying special attention to those areas where particles will collect, such as the area between the seat and the cushions.
Clean aniline leathers only using a slightly damp cloth and then immediately wipe with a dry cloth. Do not use any type of soap on aniline leathers. It is important that you do not saturate the leather.
Conditioning is not necessary. Cleaning to remove skin oils is best prevention to any deterioration of the leather. The use of any conditioners or treatments on your furniture will void the manufacturer’s warranty.
Some other important things to keep in mind:
Special attention should be given when cleaning the areas where there is more skin contact with the leather
Hair products and skin oils will chemically attack the finish on the leather.
Exposure to sun and/or extreme light sources will cause fading and potential damage.
Dark jeans and other clothing have a high risk of dye transfer onto the leather, especially when the leather is lighter in colour.
Sharp objects will easily puncture and cut into leather.
Strong, supple, and in sync with our body temperature, top grain leather is always the top choice for leather furniture. But anyone shopping for leather furniture quickly learns that there’s more to top grain leather than its location on the hide. A range of lifestyles and budgets have spawned many types of top grain leathers, or grades.
The easiest way to navigate the market’s many choices is to remember that leather’s authenticity, price, performance, texture and even colour all come down to the question of grain. Is it natural, corrected, or somewhere in between?
NATURAL (FULL) LEATHER GRAIN
The top of the top grain selection is uncorrected or natural, full grain leather. These premium hides are the real deal – fully authentic because they retain all the natural textures and markings of the cowhide, with no imperfections changed or corrected. Only five percent of all upholstery hides rank in this elite status.
Full grain leathers are coloured with clear (aniline) or semi-clear (semi-aniline) dyes to highlight, rather than cover, their natural grain and markings. But with little or no opaque pigment in these dyes, each individual cell on the hide will absorb colour in its own way. Similar to the colour variation that occurs when a wood grain is stained, full grained leathers are fully unique, emphasizing leather’s natural, one-of-a-kind quality.
CORRECTED LEATHER GRAIN
Most top grain leather is partly or fully corrected. These hides retain the quality, thickness, strength and supple feel of their top grain, but arrive at tanneries with too many unwanted blemishes. Some hides are gently buffed to even out the grain; others are sanded to remove unwanted markings and then embossed with a uniform grain pattern.
Many levels of corrected leathers exist, from slightly to heavily altered, depending on the original condition of the hide. Partly corrected hides look and feel more natural than fully corrected hides. And like full grain leather, their more natural graining, which is often not uniform in appearance, can make them more costly.
Partly corrected hides can be coloured with semi-clear (semi-aniline) dyes. But fully corrected hides are dyed with opaque pigments to help cover any unwanted natural marking.
Split leather is always fully corrected and dyed with opaque pigments. As the bottom layer of a hide that’s been spliced, split leathers lack the natural graining of top grain leather, so they benefit from grain embossing and solid colour pigments. Split leathers are usually applied to the outside arms and back of leather furniture as a complement to top grain leathers which are located on the seats, inside backs and arms – basically everywhere your body touches.
Leather correction doesn’t affect leather’s durability in any way. Though natural grains are altered for greater uniformity, corrected leathers are extremely durable and can be more suitable to active lifestyles than un-corrected, full grain leathers.
Over time, a cow’s hide, or surface grain, is subject to the varied markings of branding, veins, scars, wrinkles and bites. All are beautifully natural, authentic and integral to its hide. All are unique to leather… and a sign that it’s genuine.
Look for any one or more of these natural markings on leather furniture.
Found on virtually every hide, a brand mark varies from a letter or a number to a shape or image, and are usually one of the largest natural markings.
If brand marks are smooth and add to the character of the leather, they will be placed on the sides or outside backs of leather furniture.
A cow’s blood vessels appear as irregular, marble-like veins on a hide. Usually more visible in the neck and across the backbone, veins are often more prominent in older cows, and can also reflect the cow’s climate. In cold weather, veins contract to reduce heat loss through the skin. In warm weather, veins expand to increase it. You will find these in any position on leather furniture.
Given that veins are closer to the underside of the cow’s hide, they appear most commonly in split leathers.
SCRATCHES AND SCARS
While deep and unhealed scars are cut out of the hide, thin surface scratches are part of the natural characteristic of leather. Healed scars are as strong as the rest of the hide. Healed scratches and scars can appear in any position on leather furniture.
WRINKLES, STRETCH MARKS AND CREASES
Wrinkles occur naturally wherever loose skin is located on the hide. They are typically found in the neck and shoulder, and can be common in belly areas. Wrinkles and stretch marks are typically placed on the sides and back of leather furniture.
Mild creases may appear anywhere on the piece.
BITES AND PIN HOLES
Mosquitoes, ticks, flies and parasites all take their pound of cow flesh, leaving behind small circular marks or tiny holes on a cow’s hide. Bites are a common occurrence on hides and leather furniture, but mostly innocuous and typically small. Bites and pin holes can appear anywhere on leather furniture.
As each hide takes on the characteristics of the cow it comes from, the natural belly stretches and markings will appear. These are generally located along the edges of the hide where the leather is loose, stretchy, and the surface has a 'bubbly' appearance
LEATHER CHARACTERISTICS AND REACTIONS WITH USE ON UPHOLSTERED FURNITURE
Fireside leather will be represented in a unique way on each upholstered piece, creating variations from light to dark tones. These natural differences add depth and beauty to the furniture, variations are to be expected. Rather than a defect, they are a signature of authenticity as a natural characteristic of this luxurious leather.
Here are some examples of Fireside leather upholstered on furniture, with it’s beautiful and natural variations:
Leather is a natural skin, even when upholstered on furniture. It has limited elasticity and will soften and relax as you sit in it and with use. All leathers will stretch and in most cases they will not return to their original shape. This is a natural characteristic of genuine leather and is not a defect – it actually will become even more relaxed and loose over time. This does not affect the wear of the leather but does increase the comfort!
Here are some examples of top grain leather upholstered on furniture, relaxing with use:
A process of colouring the hide in a drum that penetrates the leathers throughout using transparent aniline dyes.
Application of polyurethane surface coating on a split or top grain leather.
Colour that is applied to the crust colour to achieve the final colour of the protected aniline.
Buffed or Polished
Top grain leather that has been mechanically sanded to remove surface imperfections.
Upholstery leather which has been tanned with chromium salts. This method makes the hide flexible and supple.
The rubbing off of surface substances or colour onto another material. Commonly referred to as dye transfer.
The raw hide that has been tanned and dyed, but has not yet been completely finished.
Colour Fastness to light is a measure of how permanent a colour is on leather after exposure to light.
Outside skin is processed and sandpapered to minimize flaws and then pigmented and embossed.
Process used to create an effect resembling a worn look or an aged appearance. Techniques used to create this effect include tumbling the hides with abrasive items in order to scratch the leather’s surface.
A dyeing process in which leather is immersed in dyes and tumbled in a rotating drum allowing maximum penetration.
A process that alters the natural grain of the leather by using etching, engraving or electrotyped plates to create a very uniform grain pattern.
Process of replacing oils that have been depleted from the hide during the tanning process.
Natural wrinkles in the leather’s grain that are unique to each hide. Normally visible only in the full grain leathers. Common around the neck and shoulder areas of the hide.
Any post-tanning treatment such as dyeing, rolling, spraying, antiquing, waxing, buffing, embossing, glazing.
Leather in which the hair has only been removed while the grain remains in it’s original state.
The leather surface is polished to high luster.
Higher shine/sheen level finish usually with the enhanced texture added.
A term used to describe the softness or feel of leather when touched with your hand.
Skins from cattle for leather furniture.
All hides and skins that are tanned.
The chemical process of removing the hair from the raw hide.
Low gloss finish usually with enhanced texture added.
A process in which hides are tumbled in rotating drum to soften the hand or enhance the grain.
Tanned, aniline dyed leather that has no protective top coat. Commonly referred to as pure aniline.
Leather which the grain has not been altered in any way. The natural appearance of the grain is predominant showing visibly healed scars, fat wrinkles, insect bites, etc.
Top grain, aniline dyed leather that has been buffed to create a “suede like” nap effect.
A luster that develops with time and use.
Leather surface that is coated with colour pigments.
When leather is pulled, the oils or the waxes in the leather cause the colour to dissipate and become lighter.
A leather that is drum dyed but has little or no protected top coating to prevent it from cracking, staining or crocking.
A two-toned effect utilizing two different colours of dye which adds depth and character to the leather.
Leather that has been aniline dyed throughout then protected by a clear or pigmented finish coating thus creating a more consistent colour than pure aniline leathers. Natural markings may be visible with some semi-aniline leathers.
The middle or bottom layer of the hide. Split leathers are used in areas that are not under any stress, as backs or sides of sofa. Embossed to create a very uniform grain pattern.
The underneath layer of a hide which has been “split” off when the top grain is separated. If finished, the split is heavily embossed and surface treated.
Leather produced from the underneath layer/lower split of a hide processing a velvet-like nap effect. Suede does not have same durable characteristics as a top grain leathers.
The process of turning raw hides into leather.
Top part of the skin or hide. The grain may be either full grain or embossed grain. The top grain of the hide is stronger and more flexible.
Refers to the “blue” colour and appearance created by the chromium tanning process.